Using The Auto Tone Function; Setting The Auto Tone Function; Set The Volume Of Auto And Slate Tones; Recording Slate Tones - Tascam DR-70D Reference Manual

4 – Recording

Using the auto tone function

The function can be used to automatically add a tone when
beginning and ending recordings.
By connecting the OUT jack on the right side of the unit
to the camera audio input jack, the same tone signal can be
recorded to both files. These tones can be used as guides when
aligning files in video editing software.
For details about how to connect a DSLR camera, see "Camera
connection and attachment" on page 16.
NOTE
If the volume is still too low even if you set the
item on the
LEVEL MONITOR SETTING
its maximum value, set the
screen to
MONITOR SETTING
the volume.

Setting the auto tone function

1. Press the MENU button to open the
2. Turn the DATA dial to select
dial.
The screen appears.
SLATE SETTING
3. Turn the DATA dial to select
DATA dial.
4. Turn the DATA dial to select the tone insertion points.
Options: OFF (default), HEAD (start of recording only),
HEAD+TAIL (start and end of recording)
5. When finished, press the 1/8 button to return to the Home
Screen.

Set the volume of auto and slate tones

You can adjust the volume setting of auto and slate tones.
1. Press the MENU button to open the
2. Turn the DATA dial to select
dial.
The
SLATE SETTING
3. Turn the DATA dial to select
the DATA dial.
4. Turn the DATA dial to set the tone volume.
Options: –12dB (default), –18dB, –24dB, –30dB, –36dB
5. When finished, press the 1/8 button to return to the Home
Screen.
26
TASCAM DR-70D
OUTPUT
screen to
item on the
OUTPUT GAIN
and then adjust
LINE
screen.
MENU
, and press the DATA
SLATE
, and press the
AUTO TONE
screen.
MENU
, and press the DATA
SLATE
screen appears.
, and press
TONE VOLUME

Recording slate tones

During recording, press the SLATE button to add a slate tone to
the recorded file at the point you want.
For details about how to connect a DSLR camera, see "Camera
connection and attachment" on page 16.
NOTE
The SLATE button must be pressed and held briefly to insert
a slate tone. This delay is to prevent accidental operation.

Moving to slate tone positions

You can move to slate tone positions in the currently selected
file when stopped or playing back.
You can use them like shortcuts to the beginning of songs, for
example.
1. Turn the DATA dial during playback or when stopped.
Turn the DATA dial right to move to the next slate tone
position and turn it left to move to the previous slate tone
position.
NOTE
If no slate tone has been inserted later in the current file,
turning the DATA dial right will move to the beginning of
the next file.
If no slate tone has been inserted earlier in the current file,
turning the DATA dial left will move to the beginning of the
current file.