Operation Via Simatic Pdm 6 (Hart); Features; Functions - Siemens SITRANS LUT400 Manual

Operation via SIMATIC PDM 6 (HART)

(SITRANS LUT400 compatible with PDM version 6.1)

Features

SIMATIC PDM is a software package used to commission and maintain SITRANS LUT400 and
other process devices. Please consult the LUT400 online help for details on using SIMATIC
PDM. (More information can be found at www.siemens.com/simatic-pdm.)
SIMATIC PDM monitors the process values, alarms and status signals of the device. It allows
you to display, compare, adjust, verify, and simulate process device data; also to set schedules
for calibration and maintenance.

Functions

Notes:
• For a complete list of parameters, see
operating instructions
• While the device is in PROGRAM MODE, the output remains active and
continues to respond to changes in the device.
Parameters are identified by name and organized into function groups. The menu
structure for SIMATIC PDM is almost identical to that of the SITRANS LUT400 LCD. See
LCD Menu Structure
in chart format.
For a list of parameters that do not appear in the menu structure and are accessed via pull-
down menus in SIMATIC PDM see page 26. See also
SIMATIC PDM
on page 24 for more details.
Feature
Quick Start (Level)
Quick Start (Volume)
Quick Start (Volume - Linearization)
Quick Start (Flow)
Pump Control Wizard
Echo Profile Utilities
1.
SITRANS LUT400 (HART) Operating Instructions (7ML19985MV01)
A5E33701270 COMMUNICATIONS FOR SITRANS LUT400 (HART) – MANUAL
1
.
in LUT400 operating instructions
page Function
9 Device configuration for simple level applications
Device configuration for simple volume
12
applications
Device configuration for volume applications
15
using complex vessel shapes
19 Device configuration for simple flow applications
22 Pump control setup
27 Echo profile viewing/comparison
Parameter reference (LUI)
1
for a complete list of parameters
Changing parameter settings using
in LUT400
Page 5