Timing Pin - Installation (Cylinder Head Off) - Dodge D250 1990 Service Manual

Base Engine Components
DODGETurbo Diesei
Out-of-Chassis Repairs
Page 91-31
Clean the gasket material from the cylinder block.
10mm
Caution: If a new
housing Is Installed,
accurately located
.HI
housing or other than the original
d, the timing pin assembly must be
Install a new gasket and gear housing.
Torque Value: 24 N-m [18 ft-lbs]
Timing Pin - Installation (Cylinder Head Off)
Caution: The timing pin assembly Is precisely located on
the gear housing to correspond to T D C for Cylinder
Number 1. The timing pin assembly must be relocated If
the gear housing Is Interchanged.