Engine Electrical System Replacement Procedures
Page 8-18
Electrical System
DODGETurbo Diesel
Screwdriver Adapter
Install new seals in the fuel heater assembly and in the adapter.
® & Install the fuel heater and adapter.
Tighten the adapter.
Torque Value: 32 N-m [24 ft-lbs]
Apply a light film of lubricating oil to the sealing ring of the fuel
water sensor. Install the sensor in the fuel water separator
/filter. Hand tighten the sensor snug against the filter body.
Fill the new fuel water separator/filter with clean fuel.
Plug in the electrical connections.