Table of Contents
Advertisement
Service and maintenance
5.3 Wheel and bearing repair
Case 2
For tube housings with through holes for bolt of 13 mm (1/2 inch).
Parts required:
● 1 - wheel assembly, complete with sealed bearings and 60 tooth gear
● 2 - bushings
● 3 - M12 washers (1 of 3 washers is optional - see
● 1 - hex head bolt M12 x 1.75, 120 mm long
● 1 - locking nut M12 x 1.75
Note
Spare parts kit 7MH7723-1FX contains parts for both Case 1 and Case 2. Extra M12
washers and stepped washers are provided.
16
⑪
on diagram below)
Operating Instructions, 07/2018, A5E45419003-AA
Milltronics RBSS
Advertisement
Table of Contents
