Hood Latch Release Cable Replacement
Callout
Preliminary Procedures
1. Remove the battery tray. Refer to "Battery Tray Replacement: ".
2. Remove the underhood electrical center/junction block. Refer to "Underhood Electrical Center or Junction Block
Replacement: ".
3. Remove the left closeout/insulator panel. Refer to "Instrument Panel Insulator Panel Replacement - Left Side: ".
Hood Latch Release Cable
1
Tip: Disconnect the cable from the hood latch release cable handle before attempting to remove the
cable.
Component Name
Hood / Fenders / Doors:
9J-7