Front Seat Back Cushion Cover And Cushion Pad Replacement (Non Fold Flat) - Suzuki XL7 2007 Service Manual

Front Seat Back Cushion Cover and Cushion Pad Replacement (Non Fold Flat)

Callout
Preliminary Procedure
Remove the front seat. Refer to "Front Seat Replacement - Bucket".
Front Seat Recliner Handle
1
Tip: Pull firmly forward on the handle to remove.
Front Seat Outer Adjuster Finish Cover
2 Refer to "Front Seat Cushion Outer Trim Panel Replacement (Non Fold Flat)" "Front Seat Cushion
Outer Trim Panel Replacement (Fold Flat)".
Front Seat Inner Adjuster Finish Panel
3 Refer to "Front Seat Cushion Inner Trim Panel Replacement (Non Fold Flat)" "Front Seat Cushion
Inner Trim Panel Replacement (Fold Flat)".
Front Seat Head Restraint
4
Refer to "Front Seat Head Restraint Replacement".
Front Seat Head Restraint Guides
Tip:
1. Disconnect the lower J-hook retainer from the seat back trim cover.
5
2. Carefully pull up the trim cover, disengaging the hoop and loop retainers, until the headrest guides
are exposed.
3. Squeeze the locking tabs on the headrest guide and pull the guides up and out of the seat back
pad.
6 Front Seat Back Cushion Cover
Front Seat Back Cushion Pad
7 Procedure
Disconnect the electrical connector, if equipped, and feed through the seat back frame.
Component Name
Seats: 9G-47