Error Messages - Bosch Performance Line User Manual

Error messages

Error messages
Display Error source
410 /418 Button(s) blocked
414 Control computer connection
419 Configuration
422 Drive unit connection
423 Rechargeable battery connection
424 Communication
426 Internal timeout
430 The control computer's rechargea-
ble battery is e.g.
431 Software version
440 Drive unit
450 Software
460 USB port
490 Control computer
500 Drive unit
502 Lighting
503 Speed sensor
510 Internal sensor
511 Drive unit
530 Rechargeable battery
Measure
Check the buttons and clean them if necessary.
Check the cable connections and contacts (visual check).
Restart the e-bike.
Check the cable connections and contacts (visual check).
Check the cable connections and contacts (visual check).
Check the cable connections and contacts (visual check).
Restart the e-bike (see chapter "Operation > E-bike").
Read the chapter "Operation > Control computer".
Restart the e-bike.
Restart the e-bike.
Restart the e-bike.
Remove the cable from the control computer.
Consult a specialist dealer.
Restart the e-bike.
Check the components of the lighting and their connection (visual check).
Restart the e-bike.
Restart the e-bike.
Restart the e-bike.
1) Switch the e-bike off.
2) Remove the rechargeable battery and check it with the
3) If the rechargeable battery is charged, insert it and start the e-bike.
button.
54