Subaru Legacy 2004 Service Manual page 415

C: DISASSEMBLY
1. STARTER ASSEMBLY
1) Loosen the nut which holds terminal M of switch
assembly, and then disconnect the connector.
(A) Terminal M
2) Remove the bolts which hold switch assembly,
and then remove the switch assembly, plunger and
plunger spring from starter as a unit.
(A)
(A) Switch ASSY
3) Remove the nuts of both sides, and then remove
rear cover set.
(A) Rear cover set
Starter
4) Remove the through-bolts and brush holder
screws of both sides, and then detach the rear cov-
er and brush holder assembly.
(A)
SC-00059
5) Remove the armature and yoke assembly from
front bracket.
SC-00060
6) Remove the packing A, planetary gear and
packing B.
(A)
SC-00061
SC(H4SO 2.0)-7
STARTING/CHARGING SYSTEMS
(A) Brush holder ASSY
(B) Rear cover
(B)
(C)
(A) Armature
(B) Yoke ASSY
(C) Front bracket
(A) Packing A
(B) Planetary gear
(C) Packing B
(A)
(B)
SC-00062
(A)
SC-00063
(C)
(A)
(B)
SC-00064