Command List - AOR SR2200 Operating Manual

COMMAND LIST

COMMAND NAME
- POWER ON
- POWER OFF
- REMOTE ON
- REMOTE OFF
- ID ( REMOTE )
- Rx-MODE
- FREQUENCY
All manuals and user guides at all-guides.com
REQUEST CMD
CMD or
R/W
HEADER
x W
QP W
^Ann W
EX W
IDnn W
R
Vx W
MRmnn
MSm
SM
SSmm
RX R
RFnnnnnnnnnn W
RFnn.nn
RFnnn
Vx
COMMAND DESCRIPTION
When the receiver's power is off, any key will power
it on.
POWER-OFF the receiver
^Ann nn = ID #
ID # = 00 to 99
(Note）In case ID # = 00 ( DEFAULT VALUE ),the
command can be input directly.
Stop control of remote receiver
nn = 00 - 99 (Setting an ID to the remote receiver ）
IDnn
VFO selection. x = A - J ( DEFAULT is VFO-A )
Memory Read. m = BANK # from 0 - 9 and n = CH #
from 00 - 99.
Memory Scan. m = BANK # from 0 - 9
Memory Select
Normal Search. mm = BANK # from 01 - 40
RFU STATUS
MR MXmnn RFnnnnnnnnnn STnnnnnn AUn MDn
BWn ATn AMn TMxxxxxxxx
MS MXmnn RFnnnnnnnnnn STnnnnnn AUn MDn
BWn ATn AMn TMxxxxxxxx
SM MXmnn RFnnnnnnnnnn STnnnnnn AUn MDn
BWn ATn AMn TMxxxxxxxx
SSmm RFnnnnnnnnnn STnnnnnn AUn MDn BWn
ATn AMn TTxxxxxxxx
Vx RFnnnnnnnnnn STnnnnnn AUn MDn BWn ATn
AMn
(Priority Channel) PPmnn RFnnnnnnnnnn
STnnnnnn AUn MDn BWn ATn AMn TMxxxxxxxx
Active VFO's Frequency in Hz.
Active VFO's Frequency in MHz
Active VFO's Frequency in MHz
Vx nnnnnnnnnn ( Hz ) VFO selection followed by
means control unit A with