Table of Contents
Advertisement
Handover of the System
Location
7
8
9
10
11
13
14
Installation Manual.indd 11
Symbol
Shows that the hybrid boiler is running (Hybrid systems only)
Shows that the hot water valve is open and the heat pump is
Shows that the unit is in freezing control mode (when the outdoor
temp us below 10°C the unit runs the water circulation pump all
Shows that the unit is running off of an external thermostat
This shows that the button you pressed can't be used at this time
This icon shows that you someone should check the unit
Shows that unit is checking the cylinder and will heat it when the
Shows that the unit is running in a forced hot water mode
Function
Current time or times for timer functions
Shows that the compressor is running
and the outdoor unit is heating
Shows that the backup heater/boiler is running
(if applicable)
Shows that the Immersion heater is running
Shows that the water circulation pump is running
heating the hot water cylinder
Shows that the unit is in defrost mode
see defrost video on you tube
the time to keep the water in the system from freezing.
Shows that Legionella mode is active
(No function)
Shows when unit is in test mode.
(Normally shows with a fault code)
Shows the remote is locked
temperature drops below the set point
Eco level operation (1-5)
11
31/08/2018 19:01:15
Hide quick links:
Advertisement
Table of Contents
