Ricoh SP 330SN Manual page 19

Easy Setup Using the CD-ROM
Using the CD-ROM supplied with this machine, you can install
the driver from your computer and configure the Wireless (Wi-Fi)
settings for this machine.
If you intend to use this machine mainly from computers, we
recommend using the CD-ROM to configure the settings.
● The following items are necessary to set up a Wireless
(Wi-Fi) connection.
● USB interface cable
Using the USB cable is needed to update the settings of
this machine when it is installed or the Wireless (Wi-Fi)
settings change in your environment. See Step 6 to
connect your computer to this machine.
● Router (access point)
● CD-ROM supplied with the machine
● To install the software, quick installation and manual
installation can be used. Using the manual installation,
you can specify data to be installed as you prefer.
1. Turn on your computer.
2. Insert the provided CD-ROM into the CD-ROM drive of the
computer.
If your computer does not have a CD-ROM drive, download a
setup file from our website.
or
3. Click [Quick Install].
4. The software license agreement appears in the [Software
License Agreement] dialog box. After reading the
agreement, click [Yes].
5. Select [Wireless(Wi-Fi)Connection] and click [Next].
6. Select [The machine's IP address is not configured or you
want to change it.] when installing this machine.
Connect your computer and this machine by using the USB
cable.
Select [The machine's IP address has been already configured.]
when configuring the Wireless (Wi-Fi) settings for this machine
is completed.
7. Follow the instructions in the setup wizard.
8. Click [Finish] in the [Setup Complete] dialog box. If the
installer prompt you to restart Windows, reboot your
computer.
Setup is completed.
17