Audio Connections - Behringer ULTRALINK PRO MX882 User Manual

3.3 Audio connections

The audio inputs and outputs on the BEHRINGER ULTRALINK PRO are fully balanced. If possible, connect the
unit to other devices in a balanced configuration to allow for maximum interference immunity.
Unbalanced use of
mono 1/4" jack plugs
Tip =
Signal
Sleeve =
Ground / Shield
Tip
Sleeve
Strain relief clamp
Input
+
Please ensure that only qualified persons install and operate the ULTRALINK PRO. During
installation and operation the user must have sufficient electrical contact to earth. Electro-
static charges might affect the operation of the ULTRALINK PRO!
8
All manuals and user guides at all-guides.com
ULTRALINK PRO MX882
Balanced use with XLR connectors
2 1
1 = Ground / Shield
2 = hot (+ve)
3 = cold (-ve)
3
For unbalanced use pin 1 and pin 3 have to be bridged
Fig. 3.1: Different plug types
3. INSTALLATION
Balanced use of
stereo 1/4" jack plugs
Tip =
hot (+ve)
Ring =
cold (-ve)
Sleeve =
Ground / Shield
Tip
Ring
Sleeve
Strain relief clamp
For connection of balanced and
unbalanced plugs, ring and sleeve have
to be bridged at the stereo plug.
1 2
3
Output