Table of Contents
Advertisement
Wired LC Connection
You can easily connect to wired Internet networks and customize the connection as
well.
1. Plug the RJ45 cable into the LAN port of the projector, then ensure the other end
is plugged into your wired Internet source.
2. Go to: Home > Settings > etwork Settings > Wired LAN
3. You can Configure the IP automatically or manually. Choosing Manual will allow
access to IP Address, Subnet Mask, Default Gateway, and DNS Server.
NOTE: It is recommended to let the system configure the network settings
automatically by choosing Cutomatic for Configure IP.
32 32
Hide quick links:
Advertisement
Table of Contents
