Connecting To Audio; Bluetooth Speaker - ViewSonic X10-4K User Manual

Connecting to Cudio

Bluetooth Speaker

The projector is equipped with a Bluetooth speaker that allows the user to connect
their device wirelessly for audio playback.
To connect and pair your device:
1. Press the Power button and select the Bluetooth menu, or press the Bluetooth
button on the remote control.
2. When the dialog box below is displayed, select Yes to enter Bluetooth mode.
NOTE: The Bluetooth LED indicator will flash blue approximately one (1) time
per second.
3. Press and hold the Bluetooth button for three (3) seconds on the remote control
to enter pairing mode. Ensure your device's Bluetooth is also activated.
NOTE: The Bluetooth LED indicator will flash blue approximately two (2) times
per second once in pairing mode. A sound effect will also be audible.
4. Upon successful connection, another sound effect will be audible in addition to
the Bluetooth LED indicator maintaining a solid blue light.
Once paired, if both the projector and your device are powered on they will
automatically connect via Bluetooth. When connected please note:
• Only the Power and Return buttons can exit Bluetooth mode.
• If a 3.5 mm audio cable is plugged into the Audio In socket, the audio signal
will switch to line in automatically.
23 23