Operations; Playing A Tape - Sony TC-TX595 Operating Instructions Manual

Operations

Playing a tape

You can use any type of tape, TYPE I (normal),
TYPE II (CrO ) or TYPE IV (metal), since the
2
tape deck automatically detects the tape type
1)
(ATS ).
1)
ATS: Automatic Tape Selection.
Tape deck TC-TX595
3
2)
DOLBY NR
2)
This tape deck is equipped with the Dolby B-type
noise reduction system.
1
Press `/1 (power) on the stereo system
to turn on the stereo system.
The tape deck turns on automatically.
2
Insert a recorded tape.
With the side you want to
play facing up
8
2 4
A S
h x
Cassette
indicator
m/M
3
Set DIRECTION to g to play one
side. Set it to s
4
Press H.
Press h to play the bottom side.
FUNCTION switches to "TAPE"
automatically, then the tape starts playing.
3)
The tape deck stops automatically after repeating
the sequence five times.
To play a tape using the stereo
system
Do the following operation in step 4;
1 Switch the function of the stereo system to tape.
2 Press (TAPE) H or (TAPE) N on the
remote.
To play the bottom side, press (TAPE) H or
(TAPE) N again. For DHC-MD313/333, press
h.
3)
to play both sides.