4.3.1
Antenna configuration example
The following diagram shows an application example for an antenna configuration of the
RF660R. The antennas are positioned at the height at which the tags are expected which
are to be identified. The maximum width of the portal that is recommended for reliable
operation is 4 m.
The diagram shows a configuration with three antennas. Up to four antennas can be used
depending on the local conditions.
Figure 4-3
Example of an antenna configuration with three antennas.
SIMATIC RF600
System Manual, 10/2009, J31069-D0171-U001-A8-7618
RF600 system planning
4.3 Antenna configurations
41