Other Functions; Using The Rotary Commander - Sony CDX-C480 Operating Instructions (primary manual) Operating Instructions Manual

Other Functions

You can connect an optional rotary
commander (RM-X4S) with this unit.
Using the rotary
commander
The rotary commander works by pressing
buttons and/or rotating controls.
You can control the optional CD or MD
changer with the rotary commander.
By pressing the button (the
SOURCE and MODE buttons)
EN
(SOURCE)
Every time you press (SOURCE), the
source changes as follows:
Tuner n CD n MD
Pressing (MODE) changes the operation
in the following ways:
• Tuner : FM1 n FM2 n AM
• CD changer : CD1 n CD2 n ...
• MD changer : MD1 n MD2 n ...
Tip
When the POWER SELECT switch is set to position
B, you can turn on this unit by pressing (SOURCE)
on the rotary commander.
By rotating the control (the SEEK/
AMS control)
12
By pressing in and rotating the
control (the PRESET/DISC control)
Other operations
(MODE) Rotate the VOL control to
adjust the volume.
Rotate the control momentarily and
release it to:
•Locate a specific track on a disc. Rotate
and hold the control until you locate the
specific point in a track, then release it to
start playback.
•Tune in the stations automatically. Rotate
and hold the control to tune in the specific
station.
Push in and rotate the control to:
•Receive the stations memorized on the
number buttons.
•Change the disc.
Press (SOUND) to adjust the
volume and sound menu.
Press (LIST) to display the
memorized names.
Press (ATT) to
attenuate the
sound.
Press (OFF) to turn
off the unit.