Recording Configuration Information - Dell SonicWALL NSA 6600 Getting Started Manual

Network security appliances
Hide thumbs Also See for SonicWALL NSA 6600:
Table of Contents

Advertisement

NSA_6600_GSG.book Page 13 Wednesday, April 3, 2013 4:52 PM

Recording Configuration Information

Use this section to record your configuration information. Be
sure to keep for future reference.
Registration Information
Serial Number:
Record the serial number found on
the bottom panel of your
Dell SonicWALL appliance.
Authentication Code:
Record the authentication code found
on the bottom panel of your
Dell SonicWALL appliance.
Networking Information
LAN IP Address:
Select a static IP address for your
Dell SonicWALL appliance that is
within the range of your local network.
_____._____._____._____
Subnet Mask:
Record the subnet mask for the local
subnet where you are installing your
Dell SonicWALL appliance.
_____._____._____._____
Ethernet WAN IP Address:
Select a static IP address for your
Ethernet WAN. This setting only
applies if you are already using an
ISP that assigns a static IP address.
_____._____._____._____
Administrator Information
Admin Name:
Select an administrator account name.
(default is admin)
Admin Password:
Select an administrator password.
(default is password)
Internet Service Provider (ISP) Information
Record the following information about your current Internet
service:
If you are
No information is usually required. However,
connecting with
some providers may require a Host Name:
DHCP
_________________________________
If you are
IP Address: _____._____._____._____
connecting with
Static IP
Subnet Mask:_____._____._____._____
Default Gateway: _____._____._____._____
Primary DNS: _____._____._____._____
DNS 2 (optional): _____._____._____._____
DNS 3 (optional): _____._____._____._____
Recording Configuration Information |
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents