Asus ROG Maximus XI Gene Manual page 36

6. USB 2.0 connectors (10-1 pin USBE34, USBE56)
These connectors are for USB 2.0 ports. Connect the USB module cable to these
connectors, then install the module to a slot opening at the back of the system chassis.
This USB connector complies with USB 2.0 specification that supports up to 480 MBps
connection speed.
DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB 2.0 module is purchased separately.
7. LED connector (8-pin LED_CON1)
This LED connector is for connecting LED strips on your back I/O cover.
1-20
Chapter 1: Product Introduction