Configuring the SIMATIC Field PG
"Hardware Options" Field
The following submenu appears when you select the "Hardware Options" field in
the main menu:
Fig. 5-8
The parameters of the interfaces present on the basic module are set here.
Entry
PCI - MPI / DP
Programming interface Displays enable or disable status of the SIMATIC Memory Card
Cardbus / PCMCIA
Slot
5-12
PhoenixBIOS Setup Utility
Main
Hardware Options
[
Enabled
PCI – MPI / DP:
Programming interface:
[Enabled]
[Enabled]
Cardbus / PCMCIA Slot:
[Enabled]
Onboard Ethernet
08000624E1CB
Ethernet Address
[Disabled]
LAN Remote Boot:
CRT / LCD selection:
[Simultan Auto]
LCD-Screensize:
[Expand]
[Auto Detect]
Touch-Pad
Help
Select Item
F1
ESC
Exit
Select Menu
"Hardware Options" Submenu
Enables the CP5611 compatible MPI/DP interface.
Interface. Enable follows the enable of PCI-MPI/DP.
[Disabled]
[Enabled]
Item Specific Help
Enable or disable the
]
PCI - Multi Point
Interface (MPI/DP).
Also, this item
Enables / Disables the
SIMATIC programming
interface.
+ / –
Change Values
F9
Select
Enter
Sub-Menu
F10
Meaning
Enable Cardbus / PCMCIA-
interface deactivated.
Resources are managed by BIOS PCI
Plug & Play mechanisms.
SIMATIC Field PG Manual
Setup Defaults
Save and Exit
A5E00075760-04