Siemens Simatic Field PG Manual page 36

Getting Familiarized with the SIMATIC Field PG
Information on the LS120/LS240 Disk Drive
Restrictions
P-Tools under STEP 5
Data cannot be edited in PCP/M format on the LS120/LS240 drive using P Tools
under STEP 5.
Notice
When you use the P Tools (for editing PCP/M files) supplied with STEP 5,
remember that these are not fully supported by the Windows Me and
Windows 2000 operating systems nor by LS120/LS240 diskette drives. If you use
the P Tools, we recommend that you use MS-DOS, Windows 3.x or Windows 95
and standard 1.44 Mbyte floppies.
Authorization with Authors W V2.x
To authorize STEP 7 and other SIMATIC components you must use AuthorsW.
Start this program on the PG via the taskbar under Start > Simatic > AuthorsW.
Usage Notes for LS120/LS240 Superdisks
The LS120/LS240 drive automatically recognizes the different floppy disk types.
Due to their higher storage capacity, Superdisks are more sensitive to dirt,
temperature and shock than conventional disks.
Notice
In order to achieve a reliable operation and high data security, please note the
following during use:
Store and transport the Superdisk in the protective cassette included to keep
dust and dirt from the disk.
Remove Superdisk from the drive when it is not being read or written to keep
dirt particles away from the disk. Do not expose the disk unnecessarily to high
operating temperatures.
Notice
If possible avoid vibration of the device, when using Superdisks. Superdisks are
more sensitive to vibration as a result of their high track density.
2-18
SIMATIC Field PG Manual
A5E00075760-04