Connecting Your Camera To Your Computer - Sony DSC-P71 Operating Instructions (primary manual) Operating Instructions Manual

3 Connecting your camera to your computer

1
, Open the jack cover, and
connect the supplied USB
cable to your camera. Then,
connect the other end of the
USB cable to your computer.
• When using a desktop computer, connect the
USB cable to the USB connector on the rear
panel.
• When using Windows XP, the copy wizard
automatically appears on the desktop. Proceed
to page 49.
USB MODE
NORMAL
a a a a
2
"USB MODE NORMAL" appears on the
LCD screen of your camera. When a USB
connection is established for the first time,
your computer automatically runs the used
program to recognize your camera. Wait for
a while.
• If "USB MODE NORMAL" does not appear,
confirm that [USB CONNECT] is set to
[NORMAL] in the SET UP settings (page 98).
Removing the USB cable
from your computer or the
"Memory Stick" from your
camera during a USB
connection
For Windows 2000, Me, or XP users
1 Double-click on the tasktray.
2 Click (Sony DSC), then click
[Stop].
3 Confirm the device on the
confirmation window, then click
[OK].
4 Click [OK].
This step is unnecessary for
Windows XP users.
5 Disconnect the USB cable or
remove the "Memory Stick."
For Windows 98 or 98SE users
Carry out only Step 5 above.
47