Still Image Editting; Protecting Images (Protect); For Single Images; For Index (Nine-Image) Screen - Sony DSC-P71 Operating Instructions (primary manual) Operating Instructions Manual

Protecting images
– PROTECT
Mode dial:
To prevent accidental erasure of an
important image, you can protect it.
Control button
MENU button
Mode dial

For single images

a Set the mode dial to
b Display the image you want to
protect using b/B.
c Press the MENU button.
The menu appears.
d Select [PROTECT] using b/B,
then press the center z.
The image currently being displayed is
now protected, and a - (Protect)
mark is shown on the screen.
2048
11 / 18
DELETE PROTECT PRINT SLIDE
OK
To cancel the protection
In Step 4, press the center z again. The
- (Protect) mark disappears.
For Index (nine-image)
screen
.
a Set the mode dial to
the W zoom button once, the
Index (nine-image) screen
appears.
b Press the MENU button.
The menu appears.
c Select [PROTECT] using b/B,
and press the center z.
d Select [SELECT] using b/B,
and press the center z.
The frame around the selected image
turns green.
e Select the image you want to
protect using b/B/v/V, and
press the center z.
A - (Protect) mark will be attached
to the selected image.
•
SET

Still image editting

, press
MENU TO NEXT
69