C Modem Configuration - HP J3188A Installation And Reference Manual

Modem Configuration
Before installing the modems (one attached to the hub and one attached to
the terminal/PC), configure them by either issuing the appropriate AT
command or by setting the modem's switches, as described in the tables in
the rest of this appendix.
Hayes Smartmodem Optima 28.8 (V.34)
Hayes ACCURA 288 V.34 + FAX
Hayes V-Series ULTRA Smartmodem 14400
At the hub end: Issue the following AT command:
A0101:
Next Rev: AT&FQ2&C1&D3S0=1&W0
At the user end: Issue the following AT command:
AT&FW1&C1&W
US Robotics Courier V.FC/V.34
At the hub end: Issue the following AT command:
A0101: AT&F&C0S0=1&W0
Next Rev: AT&F&C1S0=1&W0
At the user end: Issue the following AT command:
AT&F&W
Megahertz XJ2288 PCMCIA card modem
At the user end: Issue the following AT command:
AT&F\N0&W
AT&FQ2&C2&D3S0=1&W0 (if &C2 gives error, use &C0)
C