Washing Programmes - Electrolux GA55LI102 User Manual

Table of Contents

Advertisement

Available languages

Available languages

34 electrolux
Select and start a washing programme
with delay start
1. Open the door and switch on the appli-
ance.
2. Select a washing programme.
3. Press the delay start button again and
again until the display shows the neces-
sary number of hours for the delay start.
4. Close the appliance door.
– The countdown starts automatically.
– When the countdown is completed,
the washing programme starts auto-
matically.
The opening of the appliance door inter-
rupts the countdown. When you close
the door, the countdown continues from
the point of interruption.
You can select the delay start also with
the door closed. When you select a
washing programme, you have only 3
seconds to select the delay start. After
these 3 seconds, the washing pro-
gramme starts automatically.
Interruption of a washing programme
• Open the appliance door.
– The washing programme stops.
• Close the appliance door.
– The washing programme continues
from the point of interruption.
How to cancel a washing programme or
a delay start
If a washing programme or a delay start
has not started, you can change the se-
lection.
When a washing programme or a delay
start are in progress, it is not possible to

Washing programmes

Washing programmes
Programme
Intensive
Normal
Degree of soil
Heavy soil
Crockery, cutlery, pots
and pans
Normal soil
Crockery and cutlery
change the selection. It is necessary to
cancel the washing programme or the
delay start to make a new selection.
When you cancel the delay start, this au-
tomatically cancels the selected wash-
ing programme. You have to select the
washing programme again.
1. Press and hold the function buttons B
and C until:
– The display shows three bars.
– All the programme indicator lights
come on.
2. Make sure that there is detergent in the
detergent dispenser before you start a
new washing programme.
At the end of the washing programme
• The appliance stops automatically.
• The display goes off.
• The end-of-programme indicator light is
on.
1. Switch off the appliance.
2. Open the appliance door.
3. For better drying results, keep the door
ajar for some minutes.
Remove the load
• Let the dishes become cold before you re-
move them from the appliance. Hot dishes
are easily damaged.
• First remove the items from the lower bas-
ket, then from the upper basket.
• There can be water on the sides and door
of the appliance. Stainless steel becomes
cool more quickly than the dishes.
Type of load
Prewash
Main wash 70°C
2 middle rinses
Last rinse
Dry
Prewash
Main wash 55°C
1 middle rinse
Last rinse
Dry
Programme description

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents