Siemens SIMATIC Ident Compact Operating Instructions page 9

ASM cable
The connectors are already fitted to the ASM cable.
● You connect the communication modules, for example RF180C and ASM456, using the ASM cable.
For SIMATIC MV420, a special ASM cable with M16 socket is available.
The follow cable assignment is defined for connecting to the ASM 475 module:
①
Status and error displays
②
Connection diagram; the numbers of the connection relate to the X1 connector on the top of the housing
Figure 3-2 Front cover and inside of the front door of the ASM 475 module
Pin M16 socket Wire color of the connecting cable
H Red
G Blue
F Pink
M Red/blue
B Brown
C Green
Ethernet cable M12/RJ-45
● With a preassembled Ethernet cable, you connect a PC/PG to control and operate the reader.
● Connect the Ethernet cable to a switch to link the reader to an automation system via onboard PROFINET IO.
SIMATIC MV420/SIMATIC MV440
A5E02370910-06, 04/2013
Connection terminal ASM475 (channel 1/channel 2)
8 / 16
9 / 17
4 / 12
5 / 13
6 / 14
7 / 15
7