Sony XDCAM EX PMW-EX1 Operating Instructions Manual page 73

Solid-state memory camcorder
Hide thumbs Also See for XDCAM EX PMW-EX1:
Table of Contents

Advertisement

PICTURE PROFILE SET
Items
Skin Tone Detail
Adjusting the details to be
applied to the areas of a
specific color phase
Knee
Adjusting the knee level
Subitems and setting values Contents
Setting
On / Off
Level
–99 to +99 (±0)
1)
Area Detection
Execute/Cancel
2)
Area Indication
On / Off
Saturation
–99 to +99 (±0)
Phase
0 to 359 (130)
Width
0 to 90 (40)
Setting
On / Off
Auto Knee
On / Off
Point
50 to 109 (90)
Slope
–99 to +99 (±0)
Knee SAT Level
0 to 99 (50)
Set to "On" to enable the detail level adjustment for
specific color-phase areas.
The detail level is uniform over the entire picture
with the Off setting.
Adjust the skin-tone detail level.
Execute to detect the color in the center of the
screen. The area centering around the detected
color becomes the target area for Skin Tone Detail
control.
Set to "On" to display the Zebra 1 pattern for the
target area for Skin Tone Detail control.
Adjust the color (saturation) level for Skin Tone
Detail control.
Note
When Area Detection is executed, this setting is
automatically returned to 0.
Adjust the center color-phase value for the target
area for Skin Tone Detail control.
Note
When Area Detection is executed, this setting is
automatically changed to the value equivalent to
that of the detected color.
Adjust the width of the color phase of the target
area for Skin Tone Detail control.
Note
When Area Detection is executed, the Width
setting automatically returns to 40.
Set to "On" to compress the high-luminance area of
the picture.
Note
Knee is fixed and cannot be changed in the
following cases:
• When Gamma is set to CINE1 to 4
• When the electronic shutter is in SLS mode
• When EX Slow Shutter is active
Set to "On" to automatically set the best knee
conditions according to the luminance level of the
picture.
With "Off" the knee conditions can be manually
adjusted independently of the luminance level of
the picture.
Set the knee point when Auto Knee is "Off."
Set the knee slope (volume of compression) when
Auto Knee is "Off."
Adjust the knee saturation level for the area over
the knee point.
Picture Profiles
73

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents