Table of Contents
Advertisement
Entering text
Using Chinese Stroke mode
This mode allows you to enter individual Chinese strokes, in
written order, from top to bottom, and from left to right.
The Chinese strokes are classified into five basic
categories; heng, shu, pie, dian, and zhe. The basic strokes
are printed on keys
the following table:
Entering strokes and characters in Stroke mode
1. Press the keys that correspond to a character's component
2. Press the Up or Down navigation key to scroll through
Note: If you are uncertain of the stroke order, press
3. To select a character and add it to text, press the
46
Category
Keys
strokes. Press keys in the order that you would write the
strokes, using one press per stroke.
Example: To enter
enter
.
choices.
of each questionable stroke. Continue entering strokes
until the character displays or until you finish the character.
corresponding key,
to
on the keypad. Refer to
Strokes represented in each category
, press
to enter
to
.
and
to
in place
Advertisement
Table of Contents
