Select The Time Format; Show Or Hide The Time - NorthStar NS100 SS Quickstart Manual And Reference Manual

Select the time format

BUDDY LIST GPS/DATA
LOCAL/DIS MANUAL
USA/INT/CAN >SETTING
>GPS/DATA

Show or hide the time

BUDDY LIST GPS/DATA
LOCAL/DIS MANUAL
USA/INT/CAN >SETTING
>GPS/DATA
GPS/DATA TIME FORMAT
TIME OFFSET >12 HOUR
>TIME FORMAT
TIME DISPLAY 23:30
1. Move the cursor to GPS/DATA and press
>ENT.
2. Move the cursor to SETTING and press
>ENT.
3. Move the cursor to TIME FORMAT and press
>ENT. There is a choice of a 12 hour time
format that uses AM and PM suffixes, or a 24
hour time format.
4. Press >ENT again to select the 12 hour time
TIME DISPLAY
GPS/DATA
ENT>ON
TIME OFFSET
ESC>OFF
TIME FORMAT
>TIME DISPLAY
If you have entered the time manually (see
Reference Section 1 - Set your position and
time manually), the time is always shown on
the screen with the prefix MAN.
However, if the time is being updated through a
GPS navigation receiver, you can show or hide
the time on the LCD screen.
1. Move the cursor to GPS/DATA and press
>ENT.
2. Move the cursor to SETTING and press >ENT.
3. Move the cursor to TIME DISPLAY and press
PORT OPS
N 35'.43.211'
24 HOUR E123'45.113'
LOC 11.30PM LOC
The new time format is displayed immediately.
4. Press >ENT again to have the LCD screen
format
OR
move the cursor to 24 HR and then press
>ENT to select the 24 hour time format.
>ENT again.
show the time
OR
press <ESC to hide the time.
29