Display And Navigate A Menu - NorthStar NS100 SS Quickstart Manual And Reference Manual

Display and navigate a menu

Button Function
Escape. Press to cancel any
changes, return to the previous
mode, or backup.
Enter. Press to confirm and accept
any input or changes.
Function. Provides access to the
following useful radio functions
when combined with the button
number indicated:
FUNC 1 Radio Menu mode. Press
FUNC then 1 to display the radio
menu and DSC setup options
and to enter menu mode. (Also
see Reference Section 1 and
Reference Section 2.)
FUNC 3 Backlighting. Press FUNC then
3 to set the backlight level for the
LCD screen and handset buttons.
(Also see Adjust the backlighting.)
FUNC 4 Hailer. NS100 DS only. Press
FUNC then 4 to enter hailer mode.
(Also see Use the hailer on the
NS100 DS.)
Only a few menu options can be displayed at
any one time on the LCD screen. To show the
menu options:
1. Press FUNC then press 1 to display the first
four radio menu options OR press CALL to
display the DSC call menu.
2. Press ^CH/SEL or CH/SELv to scroll up and
down the menu until the cursor is postioned at
the desired option.
Button Function
FUNC 6 Intercom. NS100 DS only. Pick up
your handset, then press FUNC
then 6 to activate the intercom.
(Also see Use the intercom on the
NS100 DS.)
FUNC 7 Transmission power. Press
FUNC then 7 to change the
transmission power setting. Press
FUNC then 7 again to return to the
previous setting.
FUNC 9 Fog mode. Press FUNC then 9 to
enter the fog mode. (Also see Use
the foghorn.)
Distress. (Red button located
on right hand side of handset).
To make a distress call, lift the
hinged protective cover from
the button. Then either press
DISTRESS to show the Nature of
Distress categories OR hold down
DISTRESS to send an undefined
distress call. (Also see Reference
Section 5 - Send a Distress call.)
3. Press >ENT to display that option. Make any
entries or changes, if required.
4. Press >ENT to confirm changes OR press
<ESC to keep the original entry. Any changes
are active as soon as you exit the menu.
5. Press <ESC to backup to the previous screen
or to exit the menu completely.