Operator Control And Monitoring Of Ieph - Siemens SIMATIC PCS 7 Function Manual

Associated value
9
10
1.2.1.4

Operator Control and Monitoring of IEPH

Operating and monitoring
The following table shows the assignment of the parameters of the IEPH block to the
input / output fields of the corresponding faceplate for the following views:
● Function
● Charge
● Setpoints
● Materials
Representation Input/output field
Function "Status" display
LED "Runtime error"
"Error" LED
LED "Manual"
Buttons "T", "H", B": Status in string,
hexadecimal, and binary format
Operation and display "Function"
Enable for Batch
Occupy
"Start" Button
"Cancel" button
"Stop" button
"Hold" button
"Terminate" button
"Reset" button
"Resume" button
Batch "Status" display
Buttons "T", "H", "B"
Status in string, hexadecimal, and binary
format
Operation and display "Batch"
Enable for BATCH
Occupy
Batch no.
Batch name
SIMATIC BATCH blocks V8.1
Function Manual, 09/2014, A5E32335968-AA
Block parameters
AUX_PR09
AUX_PR10
User authorization
-
-
-
-
-
Can only be operated if no
batch is enabled and
occupied and if WinCC
has set user authorization
level 5 or 6.
-
-
-
-
-
-
Interface blocks
1.2 BATCH interface blocks
Block parameters
QUSTAT_L
QUSTAT_L bit 19
QUSTAT_L bit 31
QUSTAT_L bit 17
(if = 0)
-
BA_EN Bit 18
OCCUPIED bit 24
ISTART or ICTRL bit 0
IABORT or ICTRL bit 2
ISTOP or ICTRL bit 6
IHOLD or ICTRL bit 1
ITERM or ICTRL bit 4
IRESET or ICTRL bit 3
ISTART or ICTRL bit 0
QUSTAT_L
-
BA_EN bit 18
OCCUPIED bit 24
VBA_ID
VBA_NAME
19