Setup - Sony Handycam NEX-VG10E Operating Manual

Setup

Allows you to make more detailed shooting settings, or change the camcorder settings.
Shooting Settings
Movie Audio Rec
Grid Line
Shoot w/o Lens
Red Eye Reduction*
Auto Review*
* Still image only
Main Settings
Volume Settings
Beep
Language
Date/Time Setup
Area Setting
Power Save
LCD Brightness
Viewfinder Bright.
Cleaning Mode
Version
Demo Mode
Reset Default
Memory Card Tool
Format
Recover Image DB
File Number*
* Still image only
Sets whether or not to record the sound for movie recording. (On/Off)
Turns on the grid line that helps you to adjust the composition of images.
(On/Off)
Sets whether or not to record images when there is no lens. (Enable/Disable)
When using a flash (sold separately), prevents eyes from being shot in red.
(On/Off)
Shows the image right after shooting. (2 Sec/Off)
Sets the sound volume of movies.
Sets the sound produced when you operate the camcorder. (On/Off)
Selects the language used on the screen.
Sets the date and time. (year-month-day/Date Format/Daylight Svg.)
Selects the area where you are using the camcorder.
Turns the camcorder to the power save mode. (5 Min/Off)
Sets the brightness of the LCD monitor. (–2 to +2)
Sets the brightness of the viewfinder. (–1 to +1)
Allows you to clean the image sensor.
Displays the version of the camcorder and the lens.
Sets whether or not to use the recorded movie for the demonstration.
(On/Off)
Resets the camcorder to the factory-settings.
Formats the memory card.
Repairs the image database file of movies when inconsistencies are found.
Selects the method used for assigning file numbers to images. (Series/
Reset)
45
GB