Sony HVR-Z5N Operating Manual page 15

DVCAM (DV) format pictures
LCD panel
Battery pack
opened*
NP-F570
NP-F770
NP-F970
* When the LCD backlight turns on.
On the battery pack
• Before changing the battery pack, slide the
POWER switch to OFF.
• The Battery Info (p. 55) will not be correctly
displayed under the following conditions.
– The battery pack is not attached correctly.
– The battery pack is damaged.
– The battery pack is worn-out.
• Sony recommends that you use an NP-F970
battery pack when you use your camcorder with
the Memory Recording Unit (optional).
On the charging/recording/playback time
• Times measured with the camcorder at 25 °C
(77 °F). 10 to 30 °C (50 °F to 86 °F) is
recommended.
• The recording and playback time will be shorter
when you use your camcorder in low
temperatures.
• The recording and playback time will be shorter
depending on the conditions under which you
use your camcorder.
LCD panel
closed
180 190
375 390
570 595
Using an outside power source
You can use the AC Adaptor/Charger to
obtain AC power.
AC Adaptor/
Charger
1 Connect the power cord (mains lead) to
the AC Adaptor/Charger.
2 Connect the power cord (mains lead) to
the wall outlet (wall socket).
3 Connect the connecting cable (DK-415)
to the AC Adaptor/Charger.
4 Set the mode change switch of the AC
Adaptor/Charger to VCR/CAMERA.
5 Press the connecting part of the
connecting cable (DK-415) against the
back of your camcorder in the battery
slot and slide it down.
On the AC Adaptor/Charger
• Use the nearby wall outlet when using the AC
Adaptor/Charger. Disconnect the AC Adaptor/
Charger from the wall outlet (wall socket)
immediately if any malfunction occurs while
using your camcorder.
• Do not use the AC Adaptor/Charger placed in a
narrow space, such as between a wall and
furniture.
To the wall outlet
(wall socket)
Power cord
Mode change
switch
Charge lamp
Connecting cord
DK-415
Continued ,
15