Sony HVR-Z5N Operating Manual page 11

When the CH1 switch is set to
INT MIC
CH2 switch
Input channel and source
position
INT MIC Internal
microphone
(L)
Internal
microphone
(R)
INPUT1 Internal
microphone
(mono)
XLR INPUT1
INPUT2 Internal
microphone
(mono)
XLR INPUT2
When the CH1 is set to INPUT1
CH2 switch
Input channel and source
position
INT MIC XLR INPUT1
Internal
microphone
(mono)
INPUT1 XLR INPUT1
INPUT2 XLR INPUT1
XLR INPUT2
* The recording level of channel 2 is
synchronized with that of channel 1 when only
the internal microphone is used. The recording
level of channel 2 is controlled with the CH1
(AUDIO LEVEL) dial and the CH1 (AUTO/
MAN) switch.
** You can adjust the recording levels of channel 1
and channel 2 separately.
6
Set the INPUT1 switch H to an
appropriate position for the
microphone connected to the
INPUT1 jack D.
LINE: For inputting sound from an
CH1
MIC: For inputting sound from an
CH2*
MIC+48V: For inputting sound from a
CH1
CH2**
CH1
When you connect a microphone to the
INPUT2 jack, set the INPUT2 switch to
an appropriate position for that
CH2**
microphone.
b Notes
• When you connect a device that supports the
CH1
+48V power source to the INPUT1 or INPUT2
jack, set the INPUT1/INPUT2 switch to MIC
prior to connecting the device. When you
CH2**
disconnect the device, set the INPUT1/INPUT2
switch to MIC first, then disconnect it.
CH1
• When you connect a microphone that does not
support the +48V power source to the INPUT1
CH2**
or INPUT2 jack, set the INPUT1/INPUT2
switch to MIC. If you use it with the INPUT1/
CH1
INPUT2 switch set to MIC+48V, it may be
CH2**
damaged or the recorded sound may be
distorted.
z Tips
• See page 44 for adjusting the volume.
audio device
external microphone that does
not support the +48V power
source.
device that supports the
+48V power source
including the supplied
microphone.
Continued ,
11