Table of Contents
Advertisement
SCENE FILE page
<SCENE FILE>
1
2
3
4
5
STANDARD
READ (MS CAM)
WRITE(CAM MS)
FILE ID:
CAM CODE
DATE
Item
Setting
1
2
3
4
5
STORE
STANDARD
Press the rotary
encoder to execute
the operation.
READ
Press the rotary
(MS
CAM)
encoder to execute
the operation.
WRITE
Press the rotary
(CAM
MS)
encoder to execute
the operation.
GP
1 to 20
FILE ID
CAM CODE
DATE
HDW-F900 P1E2
STORE
GP: 1
Description
Saves and calls the scene file (the data painted in accordance with the
shooting scene.) (Same as the SCENE FILE page in the FILE menu.)
How to save
1. Set " " to STORE and press the rotary encoder, then "STORE NO?"
will blink.
2. Select the file No. (1 to 5) for saving.
(If data is already saved, the data will be replaced with new one.)
How to call
Set " " to the file No. to be called up and press the rotary encoder.
During calling up, the number is highlighted, and to cancel the
operation, press the rotary encoder during the highlighting.
Returns the current paint adjustment amount and switch settings to the
reference values.
Reads the five scene files corresponding to the group number selected
by GP from the memory stick to the memory of the camcorder.
Writes the five scene files stored in the memory of the camcorder to the
memory stick after being group-numbered by GP.
Used to select the scene file group number when the scene files are
saved to the memory stick or read from the memory stick.
(Corresponds the five scene files as one pair to each group.)
Writes comments to a scene file to be stored to the memory stick.
(Applies for each scene file group.)
Only displays the model name of the scene file saved in the memory
stick.
Only displays the date when the scene file was created in the memory
stick.
4-6. PAINT Menu
4-25
Advertisement
Table of Contents
