Dip Switches; Dmx Linking; Dmx Values - Chauvet Intimidator Scan LED 100 Quick Reference Manual

Intimidator™ Scan LED 100 QRG
Mounting

DIP Switches

DMX Linking

Starting Address
Master/Slave
Connection

DMX Values

6-CH
Channel Function
Before mounting this product, read the Safety Notes. The Intimidator Scan
LED 100 can be mounted in any position that provides adequate
ventilation and access with the included mounting bracket and an
appropriate clamp. See the User Manual at www.chauvetlighting.com.
The DIP switches on the rear panel of this product allow for both
standalone and DMX operation. To configure DIP switches for DMX
operation: 1~9 determine the starting address, 10 activates DMX mode.
For standalone operation and more details on DIP switches, consult the
User Manual at www.chauvetlighting.com.
The Intimidator™ Scan LED 100 can work with a DMX controller when
linked by DMX serial connections. Instructions for connecting and
configuring this product for DMX operation are in the User Manual. If you
are not familiar with DMX, download the DMX Primer from
www.chauvetlighting.com.
To ensure full access to all channels in each DMX mode, the highest
recommended DMX address is 507.
The Intimidator™ Scan LED 100 uses the DMX data connection for its
Master/Slave mode. Instructions for connecting and configuring this
product for Master/Slave operation are in the User Manual.
1 Dimmer
2 Strobe
3 Pan
4 Tilt
5 Operating Mode
Gobo Wheel Rotate
6 Speed (use when
CH 5 is 240  249)
Value Percent/Setting
000  005 Blackout
006  255 1~100%
000  005 Open
006  255 Slow~Fast
000  255 0~180°
000  255 0~90°
000  029 Open (white)
030  059 Gobo 1
060  089 Gobo 2
090  119 Gobo 3
020  149 Gobo 4
150  179 Gobo 5
180  209 Gobo 6
210  239 Gobo 7
240  249 Gobo Wheel Rotate (use CH 6 to control the
speed)
250  255 Sound-Active mode
000  009 Stop
010  255 Slow~Fast
4
EN