Table of Contents
Advertisement
Type
Camcorder
A/V connecting cable (supplied)
* Change the settings according to the TV connected.
When connecting to your TV via a VCR
Select the connecting method with [VIDEO OUT] (p. 70) depending on the input jack of the
VCR. Connect your camcorder to the LINE IN input on the VCR. Set the input selector on the
VCR to LINE (VIDEO 1, VIDEO 2, etc.).
b Notes
• Images are output in standard definition image quality (SD) when the A/V connecting cable is used.
• When the frame rate of [REC FORMAT] is 25p, images are converted to the interlace signals by the pull-
down system to be output.
z Tips
• The resolution of the signal depends on the [VIDEO OUT] setting. See page 70 for details.
• If you connect your camcorder to the TV using more than one type of cable to output images, the order of
priority of the TV input jacks is as follows:
t
HDMI
component video
• HDMI (High-Definition Multimedia Interface) is an interface to send both video/audio signals. The
HDMI OUT jack outputs high quality images and digital audio.
If your TV/VCR has a 21-pin adaptor (EUROCONNECTOR)
Use a 21-pin adaptor (commercially available) to view playback images.
Cable
(Yellow)
(White)
t
video.
TV
(No other jacks should be
connected.)
VIDEO
menu t
[VIDEO OUT] t
AUDIO
[TV TYPE] t
(Red)
[16:9]/[4:3]* (p. 70)
TV/VCR
: Signal flow
Menu Setting
(REC/OUT SET)
51
Advertisement
Table of Contents
