Table of Contents
Advertisement
Changing the settings of your camcorder recordings (Continued)
memory A (
respectively. Unless a white balance is
readjusted, values will remain even after the
power has been turned off.
When you select PRESET, [OUTDOOR] or
[INDOOR] is selected, according to which
one you previously set with [WB PRESET]
in the
(CAMERA SET) menu.
1
During recording or standby, set
the AUTO/MANUAL switch D to
MANUAL.
2
Press the WHT BAL button A.
3
Set the white balance memory
switch B to any one of
PRESET/A/B.
Select A or B for recording with the
white balance setting stored in memory
A or B.
Indicator
A
(Memory A)
B
(Memory B)
Outdoor
([OUTDOOR])
30
A) and memory B (
Shooting conditions
• White balance values
adjusted for light
sources can be stored
in memory A and
memory B. Follow the
steps in "To save the
adjusted white balance
value in memory A or
B" (p. 30).
• Recording neon signs
or fireworks
• Recording sunset/
sunrise, just after
sunset or just before
sunrise
• Under daylight color
fluorescent lamps
B),
Indicator
n
Indoor
([INDOOR])
To save the adjusted white balance
value in memory A or B
1 Set the white balance memory switch to
A (
"Adjusting to natural color (White
balance)."
2 Capture a white subject, such as white
paper, full-screen in the same lighting
condition as the one in which the subject
is.
3 Press the
A or
will stay on when the white balance
adjustment is completed and the
adjusted value is stored in
B.
b Notes
• When a white balance adjustment value has not
been obtained successfully,
turns from rapid flashing to slow flashing.
Adjust the subject appropriately and set the
shutter speed to auto or around 1/50, then try
adjusting the white balance again.
• It may take a long time to adjust the white
balance, depending on the recording conditions.
If you want to perform a different operation
before completing the adjustment, set the white
balance memory switch B to another position
to temporarily suspend white balance
adjustment.
Shooting conditions
• Under the lighting
conditions that change
in many ways, such as
a party hall
• Under strong light,
such as in a
photography studio
• Under sodium lamps
or mercury lamps
B) in step 3 of
A) or B (
(one push) button C.
B starts flashing rapidly. It
A or
A or
B
Advertisement
Table of Contents
