Sony HANDYCAM HVR-S270P Operating Manual page 103

You cannot view the picture or hear the sound on the TV connected with the
component video cable.
• Set [SDI/CMPNT] according to the requirements of the connected device (p. 82).
You cannot output S video output or video output signals.
• Set the VIDEO OUT switch to COMPOSITE (p. 60).
Dubbing/Editing/Connecting to other devices
Pictures from connected devices cannot be zoomed.
• You cannot zoom pictures from connected devices on your camcorder.
Time code and other information appear on the display of the connected
device.
• Set [DISP OUTPUT] to [LCD PANEL] while connected with video and audio cables (p. 80).
You cannot dub correctly using the video and audio cables.
• The video and audio cables are not connected properly.
Make sure that the video and audio cable is connected to the input jack of the other device for
dubbing a picture from your camcorder.
When connected using an i.LINK cable, no picture appears on the monitor
screen during dubbing.
• Set [VCR HDV/DV] according to the requirements of the connected device (p. 80).
You cannot add sound to the recorded tape.
• You cannot add sound to the recorded tape on this unit.
When you copy a movie shot in wide (16:9) format using an i.LINK cable, the
screen stretches vertically.
• You cannot output the aspect ratio setting using an i.LINK cable. Set the aspect ratio of the
TV instead.
• Connect using video and audio cables instead.
Connecting to a computer
The computer does not recognize your camcorder.
• Disconnect the cable from the computer, then connect it again securely.
• Disconnect the cable from the computer, restart the computer, then connect the computer to
your camcorder correctly.
103
Continued ,