Accu-Chek Performa Nano Owner's Booklet page 51

4. Locate the infrared (IR) window on the top of the meter.
5. Locate the IR window on either the infrared cable
(computer) or PDA.
6. Put the meter on a flat surface. Point the two IR windows
toward each other. They should be 3 to 10 cm apart.
7. Do not move the infrared cable (computer), PDA, or
meter during the transfer.
8. Follow the prompts on the software.
9. The software program may shut off the meter
automatically when the data transfer is complete.
Notes:
• If the data did not transfer successfully, try again. If you still have problems,
contact Roche.
• To make the most of the download feature, you must set the time and date in the
meter correctly.
Infrared (IR) Window
49