Accu-Chek Performa Nano Owner's Booklet page 20

Here is how to mark a test result and initiate a post-meal reminder:
Perform a test. Do not remove the test strip.
1. Press and release
Pre-Meal Marker
18
Pre-Meal Marker with Post-Meal Reminder
Post-Meal Marker
General Marker
2. When the test result marker ( , , or ) or pre-meal marker with post-meal reminder
( ) that you wish to select appears on the display, remove the test strip from the
meter.
• If you select the post-meal reminder, the meter beeps one or two hours after the
pre-meal test to remind you to do a post-meal test.
• If you select a test result marker, it is automatically stored in memory.
Note:
The post-meal marker automatically appears with the test result if a
test is performed 15 minutes before or after the post-meal reminder is
programmed to beep. Set the post-meal reminder time to one or two
hours in the set-up mode.
to toggle through the test result markers and post-meal reminder.