Installation; Technical Specifications; Product Description; Specifications - Lincoln Electric Magnum PRO 250 LX Operator's Manual

MAGNUM PRO 250 LX & LX GT SPOOL GUN

INSTALLATION

TECHNICAL SPECIFICATIONS -

K3569-2 Magnum PRO 250 LX GT
K3570-2 Magnum PRO 250 LX

PRODUCT DESCRIPTION

The Magnum Pro 250 LX and Magnum Pro 250 LX GT spool guns
are lightweight, handheld combined semiautomatic wire feeder
and welding guns, designed primarily for aluminum welding using
argon shielding gas. The feeding distance of the self-contained
wire supply to the arc is only several inches, reducing the wire
feeding problems normally associated with feeding soft aluminum
electrode through a conventional gun and cable assembly. The
cable included with the spool gun allows welding up to 25 feet
(7.6 m) from the power source.
The spool gun is ideal for aluminum fabrication in industrial shops,
automobile body shops, marinas and for the advanced hobbyist.
The Magnum PRO 250 LX GT was designed with an internal
solenoid in it. With this gun you can have reliable gas flow while
welding even when your machine doesn't have a solenoid in it. It
has all the features of the Magnum PRO 250 LX and has been
upgraded to withstand the harsh conditions of being used in
rugged environments. NOTE: Please turn off gas when
not in use.

SPECIFICATIONS

MAGNUM PRO 250 LX & LX GT
Solid and Hard Wire
Wire Capacity
.023"-.035"" (0.6mm-0.9mm)
Aluminum and cored wire
.030"-3/64" (0.8mm-1.2mm)
800 IPM MAX.
Wire Speed
300 amps @ 60% duty cycle using CO
Duty Cycle
280 amps @ 60% duty cycle using Argon Gas
200 amps @ 100% duty cycle using Argon Gas
17 Lbs. (7.7Kg.)
Shipping
Weight
25 Ft. (7.6m)
Length
Air Cooled
Coolant type:
Product
Specific Torch
Data
2
EN IEC 60974-7

SUPPLIED wITH:

KP2745-364AT, 3/64" Contact Tip
KP2747-1A, Aluminum Diffuser (Installed)
KP2743-1-62RA, Aluminum Nozzle (Installed)
KP2773-1, Insulator, 550A
KP2518-2, Drive Roll (.030"-.035", 3/64")
KP3682-180, 180 Degree Barrel (Installed)
KP2879-5, 180 Degree Barrel Liner (Installed)
Instruction Manual

RECOMMENDED PROCESSES AND EQUIPMENT

The spool gun can be used to weld aluminum and aluminum
alloys using Gas Metal Arc Welding or GMAW (also known as MIG)
process, which requires a supply of shielding gas. Argon is
normally used due to its smooth, stable arc, good metal transfer,
and low cost. Positive polarity gives good penetration and affords
a base metal cathode cleaning effect.

PRODUCT LIMITATIONS

24 VDC Input voltage
30 VDC Welding voltage using Argon shielding gas
1
INSTALLATION