Playing The Image On A Tv - Sony Handycam DCR-SR65 Handbook

Playing the image on a TV

Connect your camcorder to the input jack of a TV or VCR using the A/V connecting cable
 or an A/V connecting cable with S VIDEO . Connect your camcorder to the wall
outlet (wall socket) using the supplied AC Adaptor for this operation (p. 13). Refer also to the
instruction manuals supplied with the devices to be connected.
DCR-SR45/SR46:
DCR-SR65/SR85:
A/V Remote Connector
or A/V OUT jack
: Signal flow
 A/V connecting cable (supplied)
The Handycam Station has an A/V
OUT jack (DCR-SR65/SR85) (p. 99)
and the camcorder has an A/V
Remote Connector (p. 96). Connect
the A/V connecting cable either to
the Handycam Station or to your
camcorder, according to your setup.
 A/V connecting cable with S VIDEO
(optional)
When connecting to another device
via the S VIDEO jack, by using an A/V
connecting cable with an S VIDEO
cable (optional), higher quality images
can be produced than with an A/V
3
Device without
an S VIDEO jack
(Yellow)
(White)
(Red)
connecting cable. Connect the white
and red plugs (left/right audio) and
the S VIDEO plug (S VIDEO channel)
of the A/V connecting cable with an
S VIDEO cable (optional). The yellow
plug connection is not necessary.
Connecting only the S VIDEO plug will
not output audio.

Notes
Do not connect A/V connecting cables to both

your camcorder and the Handycam Station at
the same time. The image might get disturbed
(DCR-SR65/SR85).
Device with an
S VIDEO jack
(White)
(Red)
(Yellow)
VCRs or TVs