Playing The Image On A Tv - Sony HDR-SR11 Operating Manual

Playing the image on a TV
1
A/VOUT
~
ANR
(D ~
. " AN Remote
1@1
0
Connector
~
" Notes
Switch the input on the TV to the
connected jack.
Refer to the instruction manuals of the
TV.
~
Connect your camcorder and TV
referring to [TV CONNECT Guide].
~
Make the required output settings
on your camcorder (p. 42).
You can connect your camcorder to the TV
easily following the instructions displayed
on the LCD screen, [TV CONNECT
Guide].
" Notes
• When recording, set [X.V.COLOR] to [ON] to
play back on an x.v.Color-compliant TV (p. 70).
Some settings may need to be adjusted on the
TV when playing back. Refer to the instruction
manual of your TV for details.
Connection methods and quality of the
image (HD (high definition)/SD (standard
definition)) viewed on the TV screen differ
depending on what type of TV is connected,
and the connectors used.
Use the supplied AC Adaptor as the power
source (p. 16).
Refer also to the instruction manuals
supplied with the device to be connected.
• Your camcorder and the Handycam Station are
equipped with NY Remote Connector or AN
OUT jack (p. 112, 115). Connect the NV
connecting cable or component NY cable either
to the Handycam Station or to your camcorder.
If you connect NY connecting cables or
component NY cable to both the Handycam
Station and your camcorder at the same time,
image disturbance may occur.
40