Sony Handycam DCR-SR65 Handbook page 77

The following menu items return to the

default settings when you set the POWER
switch to OFF (CHG) for more than 12
hours.
[FOCUS]

[SPOT FOCUS]

[EXPOSURE]

[SPOT METER]

[SCENE SELECTION]

[WHITE BAL.]

[MICREF LEVEL]

[BLT-IN ZOOM MIC]

[DROP SENSOR]

[COLOR SLOW SHTR]

[S. NIGHTSHOT PLS]

Even if you press EASY, menu settings
do not switch to their defaults
automatically.
During Easy Handycam operation,

settings for the following menu items
are maintained the ones before Easy
Handycam operation.
[MOVIE MEDIA SET]

[PHOTO MEDIA SET]

[FILE NO.]

[VOLUME]

[TV TYPE]

[ DISPLAY]

[BEEP]

[ INDEX SET]

[CLOCK SET]

[AREA SET]

[DST SET]/[SUMMERTIME]

[WIDE SELECT]

[ IMAGE SIZE]

[DEMO MODE]

[ LANGUAGE SET]

[FLASH MODE]*

* DCR-SR65/SR85
1
Your camcorder gets warm.
This is because the power has been

turned on for a long time. This is not a
malfunction.
1
The supplied Remote Commander does
not function (DCR-SR65/SR85).
Set [REMOTE CTRL] to [ON] (p. 67).

Insert a battery into the battery holder with

the +/– polarities correctly matching the
+/– marks (p. 100).
Remove any obstructions between the

Remote Commander and the remote
sensor.
Point the remote sensor away from strong

light sources such as direct sunlight or
overhead lighting. Otherwise, the Remote
Commander may not function properly.
Another DVD device malfunctions
when you use the supplied Remote
Commander (DCR-SR65/SR85).
Select a commander mode other than DVD

2 for your DVD device, or cover the sensor
of your DVD device with black paper.
Batteries/Power sources
The power abruptly turns off.
When approximately 5 minutes have

elapsed while you do not operate your
camcorder, the camcorder is automatically
turned off (A.SHUT OFF). Change the
setting of [A.SHUT OFF] (p. 67), or turn
on the power again, or use the AC Adaptor.
The power turns off automatically if the

time you set in [QUICK ON STBY] passes
during sleep mode. In this case, turn on the
power again.
Charge the battery pack (p. 13).

The CHG (charge) lamp does not
light while the battery pack is being
charged.
Turn the POWER switch to OFF (CHG)

(p. 13).
Attach the battery pack to the camcorder

correctly (p. 13).
Connect the power cord (mains lead) to

the wall outlet (wall socket) properly.
The battery charge is completed (p. 13).

77