Step 2: Charging The Battery Pack - Sony Handycam DCR-HC62E Operating Manual

Step 2: Charging the battery pack

1
2
1
Battery pack
You can charge the "InfoLITHIUM"
battery pack (H series) (p. 79) after
attaching it to your camcorder.
b Notes
• You cannot attach any "InfoLITHIUM" battery
pack other than the H series to your camcorder.
1
Align the terminals of the battery
pack and your camcorder 1, then
attach the battery pack and click
it into place 2.
2
Slide the POWER switch in the
direction of the arrow to
OFF(CHG) (The default setting).
3
With the v mark on the DC plug
facing down, connect the AC
Adaptor to the DC IN jack on your
camcorder.
10
DC IN jack
To the wall outlet
(wall socket)
Power cord (Mains lead)
3
DC plug
4
AC Adaptor
4
Connect the power cord (mains
lead) to the AC Adaptor and the
wall outlet (wall socket).
CHG (charge) lamp
The CHG (charge) lamp lights up and
charging starts. The CHG (charge) lamp
turns off when the battery is fully
charged. Disconnect the AC Adaptor
from the DC IN jack.
b Notes
• Disconnect the AC Adaptor from the DC IN
jack holding both the camcorder and the DC
plug.
2
POWER switch