Adjusting The Viewfinder Details; Setting The Zebra Indication - Sony F35 Cinealta Operation Manual

Item Setting
MONI Turn all the markers on or off on the monitors
connected via the MONITOR OUT
connectors.
VBS Turn all the markers on or off on the monitors
connected via the TEST OUT and REMOTE
connectors.
The CHAR/MARK LEVEL line permits you to adjust the
brightness (0 to 50) of the character and marker
indications.
Specifying the markers to be displayed
For the outputs for the total marker indication is activated
on the <CHAR/MARK MIX> page, select and adjust the
marker(s) to be displayed on the next <MARKER
SETTING> page.
<MARKER SETTING> page
< M A R K E R S E T T I N G > U 0 3
C E N T E R
S A F E T Y
E F F E C T I V E : O F F
A S P E C T
V A R I A B L E : - -
S A F E T Y
M A S K
C U R S O R
P O S I H / V :
S I Z E W / H :
All the markers have been set to OFF at the factory.
Item Setting
CENTER Set to ON to display the center marker and
select the type of the center marker.
1: Entire cross
2: Entire cross with a hole
3: Center
4: Center with a hole
SAFETY Set to ON to display the safety zone marker
and specify the range (80%, 90%, 92.5%, or
95%).
EFFECTIVE Set to ON to display the effective pixel area.
ASPECT Set to ON to display the aspect marker and
specify the aspect:
2.40:1, 2.35:1, 1.85:1, 1.66:1, 16:9, 15:9,
14:9, 13:9, 4:3, VAR H, VAR V
VARIABLE If you select VAR H or VAR V for ASPECT,
set the H or V value.
VAR H: 12 to 1920
VAR V: 12 to 1080
SAFETY Set to ON to display the safety zone for the
selected aspect marker, and specify the
range.
MASK Set to ON to make the areas outside the
selected aspect marker dimmer, and select
the mask level (0 to 15).
52
Viewing and Setting the Viewfinder Displays
: O F F 1
B
: O F F 9 0 . 0 %
: O F F 4 : 3
: O F F 9 0 . 0 %
: O F F 1 2
: B O X
0 0
9 6 0 5 4 0
3-6-6 Adjusting the Viewfinder
Details
You can adjust the image on the viewfinder screen to
obtain a clearer view, using the <VF DETAIL> page of the
USER (OPERATION) menu. This adjustment does not
affect the image being recorded.
<VF DETAIL> page
< V F D E T A I L >
V F 1 :
B
V F 2 :
L E V E L :
C R I S P :
Item Function
VF1 Turn the VF detail adjustment function on or
off for the viewfinder connected to the VF1
connector.
VF2 Turn the VF detail adjustment function on or
off for the viewfinder connected to the VF2
connector.
LEVEL Set the level (0 to 100%) of the VF detail
adjustment function.
CRISP Set the noise crispening level (–99 to 99).

3-6-7 Setting the Zebra Indication

You can display a zebra pattern(s) on the viewfinder and
monitor screen.
Zebra (default settings)
1 (70%)
Setting the zebra indication is performed on the <ZEBRA>
page of the USER (OPERATION) menu.
U 0 4
O F F
O F F
2 5 %
0
2 (100%)