Sony Digital betacam DVW-707 Operation Manual page 194

2
Push the MENU ON/OFF/PAGE switch repeatedly to PAGE until
the SETUP CARD page shown below appears (or use the rotary
encoder).
?E11*SETUP CARD ?E11*SETUP CARD
READ( READ(pCAM)
WRITE( WRITE(pCARD)
ID EDIT ID EDIT
WRITE PROTECT WRITE PROTECT
WHITE DATA READ: WHITE DATA READ:
4
a) Displayed in engineer mode only
If no card is inserted, the message "CARD NOT INSERTED!"
appears. Close the menu and insert a card.
3
Push the MENU CANCEL/PRST/ITEM switch repeatedly to ITEM
until the cursor reaches the WRITE (
rotary encoder).
4
Press the rotary encoder.
A message asking whether or not data and the card ID of the camera
are to be written to the card appears.
4-116
Chapter 4 Adjustments and Settings for Recording
CAM)
CARD)
: :
PRESS:READ CARD PRESS:READ CARD
SETUP CARD page (factory settings)
Data read message
Data write message
OFF OFF
Setting of card ID
OFF OFF
Setting of write protection
White data read setting
CARD) position (or use the
a) function