Package Contents - DeWalt DCS373 Manual

En g li sh
labels on Charger and Battery Pack
In addition to the pictographs used in this manual,
the labels on the charger and the battery pack show
the following pictographs:
Read instruction manual before use.
Charging.
Fully charged.
Hot/cold pack delay.
x
Problem pack or charger.
Problem powerline.
Do not probe with conductive objects.
Do not charge damaged battery packs.
Use only with D
Others may burst, causing personal injury
and damage.
Do not expose to water.
Have defective cords replaced
immediately.
Charge only between 4 °C and 40 °C.
Discard the battery pack with due care for
the environment.
Do not incinerate the battery pack.
Charges Li-Ion battery packs.
See Technical data for charging time.
Only for indoor use.
12
WALT battery packs.
e

Package Contents

The package contains:
1 Cordless metal-cutting circular saw
1 30 tooth blade
1 Hex key
2 Li-Ion battery packs (M2 models)
1 Kitbox
1 Charger
1 Instruction manual
NOTE: Battery packs, chargers and kitboxes are not
included with N-models.
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
description (fig. 1, 4–6)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. Trigger switch
b. Trigger switch lock-off button
c. Depth adjustment lever
d. Spindle lock button
e. Kerf indicator
f. Blade clamping screw
g. Lower guard
h. Lower guard retracting lever
i. Battery pack
j. Sight window
k. Shoe
l. Hex key
m. Battery release button
n. Main handle
o. Auxiliary handle
p. Fuel gauge button (fig. 4)
q. Inner clamp washer (fig. 5, 6)
r. Outer clamp washer (fig. 5, 6)
s. Saw spindle (fig. 5, 6)
t. Blade (fig. 5, 6)